She’s Not Pretty; She’s At Home on Any Sea

Dauntless is On the Block

It’s been a long ride

Sad to say, not being blocked ashore, but literally, on the auction block.

Last week I attended the Pacific NW Kadey Krogen Rendezvous. At great time was had by all. It was really nice being around a lot of down to earth & friendly KK people. I will continue my association with that group, as I truly enjoy being around people who understand the capabilities of our marvelously designed and built boats.

And I found a connection to Burl Ives, that I would never have guessed as I watched him 60 years ago on TV that our lives would one day be linked. Here is a little summary I found someplace:

Naval Architect, James S. Krogen (1928 – 1994) followed a design trail that was off-the-beaten-path when compared to the general evolution of contemporary yachts. For example, in the mid-1960s, Jim Krogen designed a Navy whaleboat-to-motorsailer conversion for folk singer-songwriter-actor, Burl Ives. The relatively small yacht was the epitome of utilitarianism and set a philosophical undertone for what was to follow.

Overall, Krogen yachts exhibit an unabashed commitment to the principle that form should follow function. They are known as no-nonsense, able cruising yachts of a type that is today in serious danger of extinction.

Following the formation of a partnership between naval architect, Jim Krogen, and Florida yacht broker, Art Kadey, in 1976, Krogen yachts became known as Kadey-Krogen. By 2014, the 600th Kadey-Krogen had been built and delivered.

One of the earliest yachts produced under the Kadey-Krogen partnership was a 42-foot, full displacement cruiser that was powered by a single 135-hp Lehman diesel which drove her at an economical cruising speed of 7 knots. With 700 gallons of fuel aboard, her range was in excess of 3,000 nautical miles. And if her speed was dropped to 6 knots, her range was extended to almost 5,000 nm. Because the Krogen 42 was intended for offshore passagemaking, she could be fitted with paravane stabilizers.

The Kadey-Krogen signature profile has a swept, unbroken sheer that rises from moderate freeboard aft to a very high bow in the tradition of commercial offshore trawlers. This also meant even in large seas, no waves break over the rails.

The Kadey-Krogen trawler-yacht hull form is a genuine round bottom (or soft chine) full-displacement form that is both soft-riding and extremely efficient, averaging about 1.6 gallons/hr. at 6.8 knots (with Dauntless’ 4 bladed prop).

Below decks, the layouts of Krogen yachts are generally practical and usable, without any attempts to squeeze a quart of contents into a pint jar.

From the very beginning and continuing to this very day, Kadey Krogens of any size have been about efficiency, both inside and out.

This is how this efficiency has manifested itself for our last 8 years:

  • Inside Storage. This past summer, thinking it was time to “declutter” Dauntless, we shipped 1,000 pounds of stuff in 15 boxes on a 4’ x 3.5’ pallet stacked 6 feet high. When we were done, Dauntless looked as cluttered as ever. A testament to the vast amount of out of sight storage available on this KK42.
  • Running Costs. With fuel averaging $4 s gallon for me the last 8 years, with almost 30,000 nm under the keel, we have averaged $1 per nautical mile in total running costs (fuel, oil, expendable supplies). I would be very happy to compare this Kadey Krogen’s running costs with any other motor yacht out there. I believe our costs are half of the major competition. I wish this was a better-known fact. I’ve kept meticulous records from beginning to end, here is a summary of the first 4 years and 4,000 engine hours:
Year Summary of trip Avg Speed (kts) Eng hrs milage (nm) Fuel (gal) Gal/hr NM/Gal
2014 Cape Cod to Ireland Via Azores 5.68 638 3624 1013 1.6 3.6
2015 Ireland to Finland & return 5.19 860 4387 1206 1.4 3.6
2016 -2017 Ireland, Scotland, Fr, Sp, Morroco, Carrib, PC, Mexico 1608 2801 1.7
Summary of 2014 to end 2017 3106 5020 1.6

The table above reflects the number of engine hours, fuel use and distance travelled for each cruising season. Thus, The first Atlantic Passage from Cape Cod to Ireland via the Azores, took 638 engine hours, 1013 gallons of diesel and was 3624 nautical miles (nm) for an average of 1.6 gal/hr and 3.6 nm/gal.

From Gibraltar to Martinique, a distance of about 3,500nm required only 700 gallons of fuel and 6 gallons of oil costing me less than $1400. Now I know 99% of Krogen owners will not make the trips that I have, but at least they have that option. On the other hand, if you have a boat that is not as efficient, a $10,000 ocean passage becomes truly daunting.

While I have a written log of every event on the boat, as you can see from the above numbers, they were consistent enough, that I got lazy and stopped entering every day into my spreadsheet from which I obtained these numbers.

As for other information on the boat, I know what temperatures everything runs at: Engine coolant tank, as measured at top of tank 158°, oil filter 161°, transmission 131°and stuffing box 100° (this depends on sea water temperature and is normally 15° above sea water temperature).

So, my reality has been that over 8 years these numbers vary so little, I am able to spot issues immediately, should they arise, which they never do.

Related to all of the above is my hoard of spare parts for Dauntless. Basically, all they did for me was take up space in the engine room, but they did give me piece of mind and have pretty much been untouched for 8 years. My boat maintenance has been for the routine stuff, oil change every 200 to 300 hours, fuel filters every 50 hours unless a problem is noted. The Ford Lehman SP135 does not eat impellers nor do anything else. It just drones on until not needed anymore. I had 4 or 5 impellers when I left for the first passage and have needed none. I do change them every couple of years, but the old ones look as good as new.   The engine will drone on and on for weeks on end with never a hiccup. One realizes how comforting that is when occasionally miles from land, I would reach for something on the helm and inadvertently hit the throttle causing a dip in RPMs. Your heart goes to your throat for that instant before you realize that it was just you. Readers of my blog will know that virtually everything that has broken on the boat was broken by operator error, me!

Lastly, James Krogen designed and built a boat that could handle the North Atlantic. In hindsight, I love this boat more than ever because she kept me safe and sound in spite of some of my dubious decisions. Look at the fishing boat in Ireland next to Dauntless. Our lines, roof, bow rise, etc. are within inches of each other. James Krogen knew how to design and build a boat that would keep you safe no matter what or where. We ended up with a safe, secure, and cost-efficient boat.

Docked next to a fishing boat in Ireland
15+ foot seas Mid-Atlantic, August 2014. Waves this boat would just laugh at; me not so much!

While I have been meticulous in maintenance, my attention to her cosmetics have been lacking. My focus has always been on cruising, but I know a new owner will want a pretty boat. So I will discount that in the price, so the new owner can make her look as she should. On the other hand, should the new owner be ready to cross the Pacific tomorrow or go down the coast to Mexico, she’s willing and able to do so right now.

She’s not pretty, she’s fucking gorgeous, because we can actually afford to go places.

Coming up.

In the next week, I will post Dauntless for Sale here, with a list of equipment, some pictures (though most new pictures will have to wait until we get to Seattle, and we can get all our stuff off the boat and clean her up). I would love to sell her to someone who at least dreams about crossing oceans. I would also be happy to help in any delivery anywhere, I’d love to return to northern Europe one more time!

If you are interested in an iconic ocean crosser, contact me sooner rather than later, as I am willing to discount for the outside paint that must be redone, the teak on the gunnel which has not been touched since I bought her and the savings from sale by owner.

Dauntless in Horta, Azores on the one day of the year that the moon rises directly over Mt. Pico

 

 

 

 

 

The End Plan

This ain’t Afghanistan, we need an end plan.

Don’t look at the crabs, or Ti, look at that ugly gunnel teak.

Everyone says that it’s best to return the boat to as close to original, especially when it comes to electrics, for a good survey. But I’m not sure I can do that.

We are cleaning her bottom as Dauntless is out on the “grid” in Wrangell

No, I’m pretty sure I don’t want to do that. Why? Because this boat has gotten me where we are as she is. She’s been nothing but reliable. Many of my additions are just to make my life a little easier.

For example, when I upgraded the fridge/freezer in 2014 to the Vitrifrigos, they were very professionally wired and installed. They can use any voltage and frequency, from 240v/50hz, 120v/60hz to 12v d.c. While the 120v power goes through a breaker on the salon distribution panel, the 12v power came directly from the engine room distribution panel. I had no easy way to totally isolate the fridge or freezer. So, I added a 4-gang switch, with circuit breakers, so I had an easy way to turn off the power if need be.

Now, in the four years since I did this, I’ve probably only turned the 12v power off two times, the last one being a few months ago, when I was trying to determine my mysterious electrical draw (See Sense of Smell). So why undo something like that? Does that really increase value?

But there are a lot of cosmetic things that do need to be taken care of. Truth be told, as I’ve cruised up and down the east coast, across the Atlantic, through the Baltic and North Seas, back across the Atlantic and the Caribbean, through the Panama Canal and the long, hard slog up the west coast of North America, I didn’t find much time to do those cosmetic jobs that make boats look so pretty.

The beautiful grey paint job that I think makes Dauntless lo so determined is now five years old. Time for a refresh. The cap rail in particular looked great for two years, then showed the first bubble (it’s hard to paint teak no matter how good the preparation) at year three and looks really bad now. I may try AWL wood.

Also, the inside walls have too much evidence of botched jobs, etc. So, Dauntless needs some of that tender care that I have been so negligent in giving her over the last 30, 000 miles.

But I love her. She has been such a reliable vessel, The $10+ value of spares in half a dozen containers of spare parts have almost never been opened. All that money! But I was preparing for cruising the world and I was as afraid of getting a required part through customs in a timely manner or actually needing those spare injector tubes in the middle of the Atlantic.

As I’ve said, I never needed any of it. Even the two long term cruising spare kits from American Diesel went unused.

But the teak on the gunnel looks like hell or in reality, just untouched for 8 years! What can I expect? Eek

Right now, the plan is sort of tentative. It depends on where in Washington state I find on the hard storage for the winter. I also want to be able to do some work on her to prepare her for sale.  If I can’t do that because of restrictions on working on the boat, then does it make sense to bring her down for the winter? Maybe wait until spring??

Let’s see what I learn a the Northwest Kadey Krogen rendezvous. Umm, maybe this is starting to look like Afghanistan.