My fresh water replumbing job was 75% done yesterday, today it’s 50% and even that took a couple of hours. Suffice to say that the floor of closet now looks like Charlie Kruger took to it with a chain saw. No pictures, since many who read this are carpenters or at last know how to work wood and the pictures are not fit for a mature audience.
But it does bring back some painful memories. My first wife had asked me many, many times to repaint some chairs we had. Finally, I did. I laid the yellow paint on nice and thick, so the old color would not show through. I was pleased, though they took days to dry. Finally, I presented my masterpieces and she asked me about those drip marks. What drip marks? They weren’t there when I put them to dry. I hope she’s not reading this and cringing.
I stuck to things mechanical and electrical after that.
Who looks at the bottom of the closet anyway?
I have finished some small things though. I replaced both burners and the electric igniter on my Weber Q300 grill. That grill has spent 5 years on the ocean. I’ve been quite pleased with it.
I also installed the new thermostat in my Raritan water heater. I did notice in my travel this week that both the thermostat and heating element are available at your local Home Depot for roughly half the price. It’s expensive to print the word “marinized” on the box.
Last, but not least, I had a diver come by to check my bottom. Well, Dauntless’ bottom. And sure enough, I had a little collection of lines around my prop. I’m so happy. Coming up the California coast, I thought I felt a slightest of vibrations. Almost like a shudder every few seconds. It would not have been noticeable to anyone else and Larry didn’t feel it, but I knew. Even wanting to be wrong about it, I knew. I was worried that I had tweaked the prop. Worse yet I thought I had tweaked it by doing something stupid. Yes, even stupider than the last stupid thing.
We were underway from Ensenada to San Diego, eagerly anticipating the celebration with fireworks and fire boats that was sure to wait us in the old U.S. of A. It had been 4 years after all.
The wind was light, 10 knots from the west on our port beam. With the added Pacific swell from the northwest, the boat’s rolling had increased as the day wore on. By early afternoon, the roll was 10° to starboard and about 5° to windward or port. But occasionally the roll increased to 15° & 10°. That’s a difference of 25° and usually is the point where I really notice the roll and so I will put one or both paravane birds out. In this case, I just put the windward bird out. That would dampen the roll about 50% and we only lost 0.4 knots. A good price to pay for a nicer ride.
Suddenly, close to the USA-Mexico border, the ride of the boat abruptly changed. It became very smooth. I jumped up from the pilot house settee to look at the paravane and see that we had snagged hundreds of feet of line connected to pots, I guessed. I estimated hundreds of feet, since I could see at least 100 feet strung in the air, then to the bird which was well out of the water.
I chopped the power, the boat slowing quickly. But now, the line of the pots was snagged on the bird, but stopped dead in the water, with the pole vertical, we had all the dead weight of whatever that line was attached to.
I got the not so bright idea to go in reverse. Possibly, the line would un-snag itself at that point. It’s worked in the past, but no luck this time.
Larry and I heaved and heaved and got the line up to the bird, at which point, we cut the snagged line away. This line also had several floats on it. Once cut away, the floats and line and floating right next to the hull amidships.
Until now we had done almost everything right. I just needed to be a little patient. But patience is not a virtue I have been gifted with. I decided to go forward to get away from the floats. Yes, by running over them. Sounds stupid even in the writing. Sure enough, within seconds the line was in the prop. I stopped the motor and cursed at my stupidity.
That done, I put her in reverse, as I have unwound lines that way also. In this case, no and hell no. There came a hellish scream, which I attributed to a float being wound around the prop scrapping the hull.
Wow, as I write this, details came back that I totally forgot about!
I went in the water. I lowered the swim ladder, climbed down the ladder to the lowest rung and stood there, while Larry handed me the boat hook. I was able to snag the line using the boat hook, since it was about 10 feet under the water.
We got that line up to the boat and cut it.
I then backed up again and we were free.
But from then on, I felt this slight shudder. Had I tweaked the prop? I didn’t know until today.
I do have a SALCA cutter anode (model 2000, 2″ diameter) on the shaft, just in front of the prop. I’m sure it has saved me many times and even this time, may have helped. But that pile of lines now on the dock, was wrapped around the prop since San Diego.
In thinking about this incident, I also realize that the paravanes were well designed for incidents like this. I’m sure that is the most force put on that pole and lines since installation. The 3/8” Amsteel Blue line fore guy did its job. To stop the roll suddenly and slow the boat so abruptly, there must have been thousands of pounds of force to the aft on that line. It’s tied off permanently at the bow hawsepipe and cleat. I have it doing 4 turns over the cap rail, with a clove hitch before it’s tied off on a cleat. Thus, the cleat never really sees significant force, even under these circumstances.
Thank you, John Duffy in Miami, for doing such a great job with the paravanes.
I think I’ll have a celebratory drink, since I missed the fireworks and fireboats in San Diego.\
And I’m looking for a decently priced Hookah outfit. I need to be even more self reliant.
