Getting Ocean Ready

Just finished checking the rigging for the paravane pole and bird.

I’ve been ready to leave Vallejo for a month now. This is getting old. But I have vowed not to let myself be beat up any ore than usual.

I spent much of last week organizing parts. I thought I had only two types of hose clamps, stainless and non stainless, which I separated last year.  If only life would be so easy.

As you can see from the attached picture, I have essentially 7 different stainless-steel hose clamps and guess what, that large bunch in the back of the organizer all have stainless bands, but non stainless screws! That’s totally worthless. I wish I could be sure that that bunch was not Made in America!

My 7 types of hose clamps

And they are also organized now by the size of the screw: 5mm, ¼”, 6mm, 7mm, 8mm. this allows me to easily use the same size for any particular job, as opposed to discovering that the dual clamped sanitary hoses have two different sizes of nuts.

I’m now doing things that were not on the list, like measuring the paravane bird rigging.  When we left Martinique, 5,000 miles ago, I had the birds set to run 19 feet below the water surface. that’s 5 feet deeper than previously, as I finally realized that in larger seas, waves greater than 10 feet, the bird itself was being picked up in the rotor of the wave, negating much of its effect.

Stbd paravane pole with double loop proving a quick extra 10 feet of depth should conditions require it.

Since Martinique all has been good on that front.  Now, I made sure of the depth and also marked the poles. In addition, I re-rigged the extra line, so that I can quickly run then 10 feet deeper if the situation, really large seas, warrant it, without stopping or even slowing down.  With the re-rigging, I just have to take out a few clove hitches and the extra 10 feet is free.

Here is also a before and after picture of the driving lights. They are handy when anchoring in strange spots with other boats or mooring buoys around. I’ve also used them in dark, narrow, lonely channels. T

here have been a few too many of those.

My long term filter carton is a bit depleted. I have already taken out my last 6 Racor 2010 filters. I keep them in the engine room by the Racors..
I have only half a dozen Racor 2050 filters left for my fuel polisher, as well as a number of engine mounted filters, along with some water sediment filters for the water maker.

Driving lights off

 

Driving lights on.
I only use them for anchoring in unknown places or in narrow, but marked channels.

One thought on “Getting Ocean Ready

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s