With My Heart Still Racing

I still needed to get Dauntless out of this harbor safely.

Leaving Morro Bay at 01:42
Dauntless is near the top of the horseshoe on the CE, C-Map chart. From left to right: Raymarine E-80 radar, probably set at 1/8 mile, Samsung LCD 24″ monitor showing Coastal Explorer C-Map, below, Samsung 12″ tablet showing Navionics chart. .

After a close call, like I just had, it’s easy to relax your guard, but it’s still dark, in a narrow channel lined with boats, piers, infrastructure and even sleeping otters.

For 30 minutes I threaded my way thru the horseshoe shaped channel.

At exactly 02:00 I passed the outer marker and set my course to the northwest. ETA to Santa Cruz marina was 19:00

Video of us leaving Morro Bay:

I took a few deep breaths, regretting that that I didn’t have a sheep, goat, first born son or even a chicken to sacrifice to Poseidon.  Did a few Hail Mary’s and settled in for the rest of the night?

Windy.com had depicted a very narrow inverted trough moving off the coast during this 36-hour period. What that meant was that now, 02:00, winds were light from the land (the nightly land breeze) but would strengthen rapidly during the early morning hours. Then stay strong, 20+ knots out of the south for the next 24 hours, before the dominant high-pressure system, which had dominated the weather in the eastern Pacific for like forever, or much of the spring and summer so far, would bring back the strong northerly winds.

This meant I had until noon the following day to get thru the Golden Gate. After that, winds would be 20+ from the north.

I kept the rpms up, 1700, boat speed varied between 6.3 to 7.3 knots due to the coastal current. With no current, the speed should have been about 7 to 7.2 knots at 1700 rpms.

Pitch and roll were ok, pitch was a few degrees up and down, roll +5° to-8°, the Krogen had an easy motion. There was a swell from the NW at 4 to 8 feet and wind waves from the SE at 1 to 3 feet.

It felt so good to have the wind behind me. I could open the pilot house door without the fear of the wind grabbing it from my hand. I could stand there and just watch the ocean and the sky. I love the ocean as a fish loves water.

By noon, winds had picked up to 15 knots, still from the SE. I estimated the NW swell now at 8 to 10 feet. (which meant my earlier estimate of 4 to 8’, made in the dark, was probably understated).

Video of us underway at 13:22:

By 14:00 the winds had increased from the south and were now, 180° at 19 gusts to 25 knots. Pitch and roll had doubled: pitch was +4°/-8° & roll +11°/-11°.  That roll was at a point I would deploy the paravane stabilizers, however in this instance two factors mitigated against it:

  1. It would take a knot off my speed and
  2. I had just passed many fishing boats. I got tired of fishing trawlers buzzing me because they thought I was stealing their fish. In the heavily regulated fishing industry in the USA, it’s not as much of a problem, but I’d just spent 4 years outside the USA.

At 19:00 I entered Santa Cruz harbor.  Was tied up at 19:19.

We did 121 nm, 17 hrs:42 min, at an average speed of 6.84 knots.

I had a nice dinner with my new-found cruising friends, Ralph and Kristen.

By 21:00 I was tucked into bed, with the alarm set for 02:00 and my last day of the 2018 Baja Bash.

The last day of June ended with a whimper.

All’s Well that Ends Well.

 

 

 

 

 

 

 

 

 

Seconds from Disaster

A long, harrowing day was over. A good night’s sleep erased much of the drama. I was closer and closer to the end of this Baja bash.

07:25 I get up

07:30 I did my morning checks and log entries:

  • Fuel: 3.25” port; 5.5” stbd
  • Batts: Current draw -8 amps, 12.48v, -84 amp-hrs.
  • H2O: 72-gal port, 82 gal stbd, feed stbd
  • Oil: right on the full line
  • ATF: 1 bar down, NC (Since I was still losing ATF, I checked this, normally I don’t)

07:53 Engine start, 6625.88 engine hours; Systems all Go.

07:58 Haul anchor

08:08 Anchor secured.

08:10 Underway to Morro Bay, following the track I came in on.

08:15 Do weather observation: Overcast Stratus Strata cu, Vis 2 miles fog, 1017mb 55° 51° 49° (sea temp) winds 27005

08:42 1700 rpms, 6.8 kts, slow to 1600, 6.4 kts, 1-2 ft swell on bow, larger swell 3-5 ft n bow. Pitch +4°/-4° Roll +6°/-3° benign.

09:25 1600, 6.5 kts, course 293°T, winds 27007 Pitch increased to +8/-8°

10:22 Change course to 016°, 1600 rpms, 6.2 kts, 3.5 nm to Morro Bay entrance. 7 knot winds on beam are producing a lazy roll of +10° (to stbd)/to -05° (to port).

11:30 Enter Morro Bay. Spot my first Sea Otters. Great.  One more thing not to run over besides the ubiquitous paddle board and kayak people.

Sea Otters of Morro Bay

12:03 With a slow, almost idle, 4 kt approach (The minimum speed to have enough way to control boat), I approach the Morro Bay Yacht Club dock. It parallels the coast and there is ample room for me. I make a 180° to port (the direction this KK loves to turn) and am tied to the dock minutes later.

12:05 Docked at MBYC. An easy day, 3:55, 23 nm, 5.9 avg speed.

Arrival track is good. Departure is Garmin.
If you go to Share.Delorme. com/Dauntelss by clicking on the dot it gives you the speed, time and location, but times look converted. Thanks to Google, Garmin or Windows.

Morro Bay turned out to be a delight. Delightful people at the delightful Morro Bay Yacht Club (MBYC). If I was ever in one place long enough to join a yacht club, MBYC would be the kind of place I’d love to join.  Having to wait out the weather for four days turned out nice. Really reasonably priced at $35 per day, it was a pleasure to be there. I felt good and knew that time wise, I’d be good to go if I could leave on the 30th.

Morro Bay Yacht Club hamburger night
Dauntless in front of the MBYC

I watched the winds every day and the forecasts were tracking well. I thought to leave Friday, but the winds were still up and while forecast to go down later in the day, this is a perfect example of when I say, “Don’t leave based on a forecast”. If your waiting for light winds, wait until you see light winds.

Also, MBYC had hamburger night Friday evening or maybe it was cocktail hour. In any case, I vowed to leave early Saturday morning, if winds were light as predicted.

Now the plan was getting down to hours. The anticipated 36-hour weather window showed light winds becoming increasing strong, but from the south as Saturday progressed into Sunday, but by Sunday afternoon, the northerlies would be back with a vengeance, 30+ knots west of the Golden Gate.

Additionally, the trip up San Francisco Bay must be timed for the currents and tides. The currents are as strong as hell’s Gate in NYC. So, I had to back up all my arrivals and departures so that I would arrive at the Golden Gate between 12:00 and 13:00 Sunday July 1st.

To get there at that time, I had to leave Santa Cruz before 03:00. So, if I wanted 5 hours sleep in Santa Cruz and a time to have dinner with some new boat friends who had their boat there, I had to leave MBYC at 01:00 to do the 121-mile trip in 18 hours, getting me to Santa Cruz by 18+1= 19:00

No problem. Just an early evening and get up at 01:00.

this picture was taken just 5 hours before my departure. I was so enamored with the sunset that I really did not look at the situation.
Notice the solar panel array on the port side stern of the sail boat in front of me.

Dauntless was parallel parked between two sailboats. The evening before I had asked about leaving that early, anything I needed to know. Everything seemed routine. I should be able to just push the bow out as I realized the last lines.

Maybe the sailors giving me this advice did not realize that Dauntless was 44,000 pounds? Certainly no one warned me about the current.

01:15 up, Saturday morning dawned with the expected light winds, I was ready to go.

01:20 As I did my routine combined current check and pee, it was obvious that the current was not insignificant.

The next 8 minutes were the most harrowing of the last three months.

It was obvious I couldn’t just undo the lines and push her out away from the dock and SV 15’ in front. Plan A was dead.

The stupid sailboat in front of me has two solar panels out behind his stern. On the first picture of this post, the sunset, the solar panel array is visible on the port side stern of the sail boat in front of me. They are probably 12 to 15 feet from my bow pulpit, which is 5 feet above them. But my hull will impact them before it hits anything else. No fender could protect them. This guy should be on a mooring.

Plan B: I untied all lines, but for the midship cleat. I wrapped it around the dock cleat near the stern, so it would slide thru once I released tension on my side. Meaning the line was secured to the boats stbd midship cleat, then back to the stern cleat on the dock and then I’m holding the bitter end in my hand while on the dock, near the pilot house door. The boat is in neutral at idle. For this to work, my plan is to give the bow a mighty push from the dock, releasing the line while I clamber on board.

With one mighty heave, I was truly seconds from disaster.

Dauntless was not moving out as much as I had hoped. I also was keenly aware that I was risking her leaving without me.

I clambered on board, as dauntless drifted forward crab like, her bow maybe 15 feet from the dock, stern still near the dock. I debated momentarily, for a split second at most, whether to just give her a shot of power, hoping that she would go straight out into the channel.

At 1.5 knots, that about 2 feet per second. In the 6 seconds it took me from release of the line, get on board and into pilot house, Dauntless moved 12 to 15 feet, the bow pulpit was almost over the left side of the sailboat. The stupid solar panels are a few feet from my stbd hull.

It was clear to me in a moment that if I gave it forward power, it would rake the entire starboard side of Dauntless against the stern port quarter of the SV.

I quickly put her in reverse and slightly increased power to 1100. I also had a sailboat behind me. I ran out to the bow, just in time to find off the stupid solar panels as the Kadey Krogen finally started to retreat.

I ran to the side deck to see what kind of room I now had behind me. I need to be tied to the dock I bought myself some more seconds by leaving her at idle in reverse. This gave me enough time to get to the side deck and get a line on the dock cleat. I made it tight and thought about what to do.

I took some needed breaths. I had to be calm now What were my options? It’s almost 1:30 in the morning. No one is getting up soon. On one hand it’s only a schedule, but being alone, makes the schedule even more important. If I didn’t leave now, I would be forced to run overnight. Which then has an impact the following day.

The Golden Gate timing was immutable.

I wanted to leave, but the idea that I start me day be destroying this boat’s solar panels would really fuck up my day.

I tied the boat thru the stern cleat to the dock’s cleat just a couple feet away.

I would try to push the bow out with the stern tied. I wouldn’t do anything else. Engine at idle, transmission neutral.  It was just an experiment to see how far the bow would actually go out. If it went out to 45°, It would probably work.

It went to maybe 20°.

Tied again with a little more slack on the stern line, same results, but now she headed for those f…ing solar panels again like they were a magnet.

I had some seconds to spare this time, but I had to get her in reverse. We were still attached to the stern dock cleat. I had tied it so that while in reverse it did not have enough slack to hit the boat behind me. In other words, while I could watch the bow, I had to make sure when backing not to hit the boat just behind me.

Then I noticed an interesting phenomenon in reverse, attached to the stern cleat, the bow came out.!

That made perfect sense since Dauntless stern always wants to starboard. I need 2° of right rudder to go straight. In reverse, the prop walk is still to the right, to starboard, which is pone of the primary reasons, I always try to dock and tie on the starboard side.

(which in a recently found video has me backing into the slip in Golfito, Costa Rica. Once I figure out how to get it not inverted I will upload)

I checked the line on the dock and boat to make sure they were secure and then gave her more power in reverse. The bow keeps coming out more and more. This would work.

Back to idle, I quickly retied the stern line so that the closed loop was over the forward horn of the cleat. I then ran the line thru the stern hawse pipe forward inside the boat to the midships cleat.

I put the boat in reverse and added some power.

The bow came out further and further. Still in reverse, I sent down to the midships cleat, and took the line in my hand and walked it back to the pilot house door. With the line in my hand, I checked the port side to make sure it was still clear, gave her more power and the bow came well out.

Now, I knew the terrible downside of this plan. If that dock line snagged on something, at best it would slam the boat back to the dock hitting the boat ahead, at worse, I could drip the whole dock up, causing even more mayhem.

And I couldn’t check it. I still had to get the stern out to not hit the sailboat.

When it seemed, the bow would come out no more, I had to force myself to be slow and put her in idle, neutral, forward, power. Probably two to three seconds.

But remember at 2 feet per second forward due to current. In just doing that, reverse to forward, without slamming the damper plate, used half the distance between the two boats.

I stayed right behind the helm. I had to hope the line slipped off cleanly. As the solar panels were about two feet off the pilot house door, I swung the wheel hard right and goosed the power, to kick the stern out. The boat was still crabbing forward, so even with that maneuver, the stern only cleared by a few feet.

But she cleared. I hauled in the stern line quickly and turned on my driving lights to make sure I didn’t run over any sleeping sea otters.

01:28 Underway to Santa Cruz. I thanked every god I knew.

In hindsight, some thoughts:

  • It’s a no-brainer that I should have just swapped positions with one of the two sailboats. Either being in the front or end, would have been leaving no problem. Also, everyone at the YC was so accommodating, it would have been no problem.
  • Not as obvious is how the lack of a functional bow thruster affected this. It’s been three plus years now since by bow thruster stopped working. At least two times, we thought it was fixed, only to discover it wasn’t. But clearly, it hasn’t been a priority. Why?
    • Before it stopped working, there were two memorable times when I needed it, but winds and currents overwhelmed it. Thus, it has seemed better to just learn to live without than to depend on something that may not work as well as hoped in the worst conditions.
    • Be cause of that, I also stopped doing stuff because some marina or dock master suggested it. Now, I’ll say, “I don’t have a bow thruster, I can’t do that” Oh, no problem, we’ll put you on this “T” then! Duh!
    • And now this experience reinforces my feelings that at least for me, I’m better off without it. My first thought was if the bow thruster was working this would have been easy. And therein lies the problem. I would have pushed the bow out, jumped on board, used the bow thruster without the understanding that the boat was moving 2 feet a second and while the bow would have missed, the broad side of the boat would have slammed into the stern of the sailboat. No way was it going to get out of the way in the 10 seconds I had.
  • Yes, God certainly Watches Over Fools and Drunkards.

 

The Rest of the Story

Larry had returned to Alaska also, so when I got back to Dauntless on the 24th. I’d be taking her the last 400 miles of this 2000+ mile trip to Vallejo on my own. I had a plane ticket to leave Sacramento on 3 July to Austin.

My route thru Channel Isl Harbor

Assuming I had to arrive on the 2nd, I had 8 days to get to Vallejo. Ray, one of my boat mates in the new marina had kindly offered to give me a ride to the airport at 0h dark-30, so, I was back on the clock.

The first leg was critical, 70 nm to Point Conception. Winds had been light or southerly for two days, while I was in Salt Lake City, now, my day of departure, Monday they were forecast to increase from the west as the day progressed. (This is the way I use weather forecasts, looking at the trend, but not necessarily believing the specifics). 70 miles is 12 hours steaming time. I wanted to get around Point Conception before 16:00, otherwise as winds picked up on the bow, we would go slower and slower and I would become ever more miserable, yet again.

Therefore, I planned my departure from Kyoko’s dock at 04:00.

I never sleep well before embarking on any kind of trip, be it, by plane, train, automobile or boat. Thus, I was up just after 3 and figured I may as well get this show on the road.

I have a standard departure procedure. One that I adhere to since pulling away from the dock in the Chesapeake, 4 years ago, only to have the engine stop two minutes later from no fuel. At that time, I dropped the anchor in emergency mode (pulling the chain out of the wildcat and letting the anchor freefall) to stop our drift into nearby boats. Once that was done, I headed to the engine room to see what happened. A quick glance showed both fuel tank feeds were closed. Since I had just opened one, it was clear to me that in my mindset to “open” a closed valve, I had closed the one that was open. So much for check lists.

Getting Underway at 04:07

Way back then, I still did not have my auxiliary fuel pump installed, so of course it took 10 minutes of lift pump masturbation to get the air out and everyone happy again.

Consequently, I follow a standard start up routine, which consists of:

  • Engine room check, smelling and looking for obvious leaks and confirming fuel feed and Racor use.
  • Engine start
  • Turn on breakers for:
    • Running lights
    • VHF radio
    • Radar
    • Auto Pilot
    • “Loran” that’s the breaker used for my USB ports now
    • Horn
    • Check Anchor light is off
  • The boat computer, modems, router, Maretron system, two Samsung LCD displays are all 12 volt and on a separate breaker that is not on the pilot house system. They were already on, as that system takes a few minutes to boot up, as the router can be picky.

Now, on this night, I had already taken one spring line off before I went to sleep. In hindsight, that was probably a mistake, as it got me out of my routine.

Channel Isl Hbr overhead docking

03:30 I did my engine room check. I was also out of my routine because my engine room bilge pump was off and had been for the 10 days I was on this dock. With the little leak I had from the transmission, while no significant oil would be discharged, it would still make an embarrassing oil sheen, would not be nice for Kyoko and Mike, who had so graciously given me this spot. I could easily wait until we were off-shore.

03:43 Engine start. To this day, it is unclear to me what I was thinking. But I didn’t turn on the Auto Pilot or the Radar. More likely I did, but in any case, I untied from the dock, without realizing that neither was on.

03:52 Free from the dock and underway. I make the 90° turn to starboard to clear the dock, at which point I realize the Radar is not on. It’s dark. I don’t travel without the radar in the daytime, let alone now. But what to do.

These fairways were relatively wide, maybe 150 feet, but with boats and/or docks on either side. To return to Kyoko’s dock, I would have to do a 180° to port, then a 270° to dock bow facing out, as I was. In the dark, alone, that did not appeal to me. I also did not want to dock bow in, tie on the port side, as all my lines were on the stbd side. Again, being alone, limited my options. I decided to press on and look for a convenient place to stop to be bel to diagnose and solve the electrical issue.

In hindsight, I should have turned around and docked bow in. As it turned out, where I did decide to dock had a current that was vexing. At least this was a dock I knew. But at the time, I was more concerned about hitting something and felt it would be better someplace else. There must be some fuel dock or some such on the 40 minute it would take to go thru the channels and harbor to the sea.

My abrupt stop of video and boat for that matter is because while approaching the bridge, I was sure it was the same bridge I had come under two weeks earlier. But then, it that moment of panic, I thought maybe in the dark, I had made a wrong turn. I didn’t, but that’s what being in the dark will do for you. 

So, I slowed to inch under the bridge. I then proceeded to spend 15 minutes trying to back in a dock. With no current, it would have been easy, but in this case, there was a current, pushing the boat and especially the bow to port, so as I backed I’d end up almost perpendicular to the dock. After 3 or 4 attempts, I gave up and decided it would be easier to just go bow in around the corner. It was, and I did.

Coastal Explorer and Maretron data laving CI hbr

Just tied to midships. The boat secure, I was able to get under the helm to see why I had no power to the radar and autopilot.

Pilot house voltage has been an issue since day 1. I need to run a bigger or additional line and ground to the pilot house. When on long cruises, once the batteries are fully charged, the voltage at the batteries goes to 12.85v or thereabouts. The problem is that voltage in the pilot house is down to the low 12v. The Raymarine radar display will blink out momentarily when the voltage dips below 12. This usually happens when the auto pilot commands a longer turn. It gets annoying. So, since I never got around to running the additional wires, I instead did my normal half-assed fix of jumping from one buss to the other. The pilot house electrical panel has three separate busses. It used to be two, but sometime a couple years ago, I thought I had a fix for the radar by making a third buss. It sort of worked.

But coming north with Larry the radar display (not the transmitter or computer, only the display) started blinking again. I added another jumper. Worked great. But then upon arrival, I redid in a different way. Why? who knows!!

That different way is what was not working. I realized right away why the autopilot wasn’t getting power. So, I put it back the way it was, and all was good. That took 5 minutes. The additional docking took 45 minutes.

That delay would bite me in the ass later that afternoon.  Once I got out to sea, the winds were light from the south or southwest. I was headed 280°, just north of west. Winds out of the south were good, east better. Late in the morning the winds started to turn to 280° at 06 kts, right on the nose. 3 hours later at 14:00 they were 28012 g 15 kts, pitching had increased to 12° up and down and speed was reduced by one knot.

Underway again

I was able to make the turn to the NNW, 340° at 16:00. Winds had already increased to 290° 14 g 20. The turn took the winds and seas off the bow to the port forward quarter, much better than dead ahead. I was grateful for my early morning start.

The rest of the day was a piece of cake. Winds stayed 300° 15 g 20 for the rest of the evening. We were pitching and rolling, but it was tolerable. I didn’t jump overboard as I have been tempted to do when going into ahead sea.

And now you know the rest of the story.

Passing an Oil Platform south of Santa Barbara

I arrived in off Avila Beach in San Luis Obispo Bay around 22:00 and anchored that night using the radar. But then you already knew that.

Anchoring at Night

 

 

Time Waits for No One

I was on schedule, the one I’d made month’s earlier. It was June 10th.

So Calif from SD to Channel Islands The missing segment north of San Diego to Oceanside, is simply Garmim, being Garmin.

460 nm to go to our winter home of Vallejo, close compared to only a month ago, but now time was getting compressed. My hard, drop dead dates were also much closer.  July 6th was the hardest one, my flight from Austin Texas back to SGN, Saigon, HCMC, Vietnam.

Airline tickets can always be changed, but at a price and I was tired of just pissing money away.

CE chart off CA coast to Channel Islands Please don’t get confused. Channel Islands Harbor is NOT in the Channel Islands. But instead is just south of Oxnard on the mainland. That’s California just being California.

I also had a wedding in Salt Lake City June 23rd, that I really, really wanted to attend. Three years earlier, I’d crossed the stormy North Sea to get back to Ireland in time to meet my dear friend Jennifer, who was coming to Ireland just to see Dauntless. I’d known her since she was 8 years old. Now, she had met the love of her life and was getting married. I had to be there.

I also wanted, needed to go to Fairbanks, Alaska before I left the USA

I’d already arranged the marina for the winter, in Vallejo California.

It was simply going to be a busy month, but doable if the weather cooperated.

Entering Channel Islands harbor, which is NOT in the Channel Islands. But instead is just south of Oxnard on the mainland. That’s California just being California.

The most recent version of the plan had Dauntless and I getting to Vallejo by the 17th, flying to SLC on the 21st, then onto Fairbanks on the 25th, ending in Austin, Texas on the 3rd. I have good friends there and it so happens that the plane ticket to Vietnam is significantly cheaper if it starts in Austin (or other smaller markets) then NY or Detroit, even though my routing goes thru Detroit.

What are friends and family for? Friends and family are there to talk you out of stupid ideas or better said: to help you see the better plan.

Kyoko’s beautiful house in Channel Islands harbor

My friends, Mike and Adrianna, who now also have a Kadey Krogen 42, called While Knuckles, had suggested earlier that I stay in southern California longer. The reason I had resisted was that that plan upset my sense of completion: let’s get Dauntless settled, then travel.

The Pacific off the Southern California coast, south of Santa Barbara, has significantly better cruising weather. The winds are still predominately from the NW, but more like 50% of the time versus 90% further south. In addition, there are long periods of light & variable winds. Perfect cruising weather.

Dauntless from Kyoko’s house

And that’s what we had for the next five days.

Mike and Adrianna keep their boat in front of a friend house in Channel Islands harbor. They spoke to their friend, Kyoto, and she was happy to have my Kadey Krogen there, while White Knuckles was in Ensenada having some extensive upgrades taken care of.

The weather was also changing. It became clear that I would have to wait to do the last 270 miles from Point Conception to the Golden Gate and Vallejo. So, I took

Dauntless in front of Kyoko’s house

Mike and Kyoko up on their offer to keep Dauntless there as long as I needed, while I:

  1. Waited for weather
  2. Attended the wedding and
  3. Flew to Fairbanks and back
  4. Spent more money on tools and spares at Harbor Freight

I had to change one place ticket, but this was a much better plan. I was able to travel to the wedding and then Alaska knowing Dauntless was in good hands with sharp eyes watching out for her. I really appreciated the hospitality and it made for great 10 days

.

Harbor Freight is Wonderful

,

Dauntless Returns to the USA

Dauntless returned to the USA on June 9, 2018; four years after she left Cape Cod, Mass. I left with Julie and came back with Larry, an interesting swap. But it’s nice to share special moments with special people and I’ve known Larry since we met on T-3 in 1973.

CE chart of our arrival in San Diego

He’s good crew. He knows how to find the best ride for the conditions of wind and seas and he knows when to call me.

The check-in pier to the USA in San Diego is at the police dock at the entrance to the harbor. When we arrived at 19:00 there was a large fishing trawler occupying most of the dock. A spot on the Visitor’s Pier was open and I took it. Upon calling customs and Immigration, they told me everyone was busy with that fishing trawler, took my number and said they’d get back to me.

Noon , 6 hours from SD

Some minutes later, they did just that.  Telling me they were busy, they asked if we had Global Entry. We did, they took our passport numbers and welcomed us to the USA. After the nightmare of paperwork that the Caribbean is, I welcomed some common sense.

Larry and I celebrated our return by going to the typical restaurant & bar ubiquitous in the USA at upscale marinas and sea shores. We paid a lot for the crappiest meal we’d had in weeks. Welcome Home.

The Visitors Dock

It was 17 days from Cabo San Lucas to San Diego. I’ve written about most of the highlights or lowlights already. If you missed it, here are some links:

The Dingy Fiasco part 1

Third Time is the Charm; But it Wasn’t Easy

The Good, the Bad & the Ugly

Four Easy Days

The last 17 days saw us biding our time in anchorages, opposite, hot, dry, almost deserted towns, waiting for strong NW winds to subside so we could proceed NW in weaker NW winds.

Everything ended up working out so well thanks to generous friends and wonderful strangers.

Yet, I feel a disquiet that I hope is nothing more than the phase of the moon.

 

 

 

 

Self-Reliance

People tell me how brave I am to cross oceans in a little boat like my 42-foot Kadey Krogen. That’s a sentiment that always makes my uncomfortable. I know I’m not brave and I hate fixing things because I suck at it.

A 14+ foot Wave goes on its way

But I’m prepared, and I pride myself on being self-reliant.

That self-reliance trumps everything else. It tells me I Can Do It; even when waves are towering over my head, as we bob in the middle of ocean until I solve the problem.

That self-reliance washes over me like a breaking wave, letting me sleep at night, enjoy the day and think, reason, all the time.

My mother and god-mother were always quick to relate the story to anyone who would listen of when I was very young, so young, that I have no recollection, of me crossing the street with my god-mother and my tricycle. Getting to the curb on the other side of the street, my god-mother went to help me lift it onto the curb and sidewalk, but I didn’t want any help and became adamant, yelling, “Self, Self”, evidently the only words I knew at the time.

24 Dec 2006 15:40 Soon to be stuck

That’s not bravery, I just didn’t want any help. My self-satisfaction comes from getting the job done myself. When I must ask for help, I feel a failure. I wasn’t prepared.

Like one Christmas eve before Dauntless came into my life, my wife and I were on one of our winter adventures, this time on the Gaspe Peninsula, well north of Novia Scotia and north of New Brunswick. We found ourselves stranded on a mountain trail. (Google maps depicted it as a road, but in fact it turned out to be a skimobile track, as I discovered trudging thru the heavy snow looking for a place marker) I had strayed off the snow-covered road and the right side of the Jeep was in a deep ditch. After spending hours doing everything I knew to get us out, I finally relented and called the Canadian Mounties. Another hour later, they showed up with a tow truck, who pulled me back onto the road and we were good to go again.

I was bummed that we’d had to call for help and further bummed that we were so close to getting over the mountain heading to the coast, and now, we would have to backtrack and take the long way around. As you know from my experiences in Cabo, I hate turning around.

24 Dec 20016 15:48 I think I got stuck now.

But only a couple hours later, ensconced in a warm, little restaurant, that was luckily open on Christmas Eve, another adventure that ended well and a lesson learned: when in Quebec, learn French.

While I no longer have that Jeep or that wife, I still find myself reflecting what I should have done differently. After years of thought, a little fortress type anchor with a come-a-long, would have gotten us out on my own. I think!

When I became the commander of a weather station in Alaska, while in the U.S. Air Force, I remember my commander making it clear to me that my job was to make sure he never heard from me. No news was good news.  That was simple, direct and effective.

The Cute place we found for dinner. All’s Well that Ends Well

Of all the organizations I have worked for and with, I found the USAF to be the best at teaching leadership and thus building consensus within units. For people who have never served in the military, the perception is that it is a top down organization. In fact, that’s not the case.

Our military is not like the German’s of WWII, in which the SS was tasked with executing German Army members found to be retreating or the Russians, who had political minders in every unit ready to shoot anyone who turned their back to the enemy.

Our military leaders, officers and non-commissioned officers (sergeants) are taught to build consensus through trust and respect. Nobody is going to charge that hill if they think, you, as their leader, don’t have their best interests in mind.

It’s why when push comes to shove, I think we do have the best military people in the world.

Taking the leadership skills, I learned in the Air Force suited me well in my education career. When I became the principal of a failing school in the Bronx, I did turn it around. To do so, I needed the support of the teachers, which I had, despite a couple of malcontents.

In fact, despite them, we were able to make significant changes to our programming, like adding block teaching classes and longer one-hour periods, that required the approval of the teachers and the teacher’s union representative. Every year these initiatives were approved because of consensus building. Our results reflected this success, with a more than doubling of passing scores on the years’ end tests and our graduation rate. Chancellor Klein said to put the kids first and I did. Simple.

Now a normal minded person would think that self-reliance is a good thing. I don’t take it to extremes, I’m still not stuck in the snow waiting for spring.

So, what’s the downside?

I never recognized that my immediate boss in the NYC Dept of Education, hated my self-reliance. It was my Achilles heel. I thought our data spoke for itself. Our school was doing much better than our peer schools. But New York is nothing if it’s not political and I’m not so political if you haven’t noticed.

When the regime changed, my focus on students and their success, no longer mattered. My supervisor didn’t want a self-reliant principal, she wanted a sycophant. I should have been calling her every week, asking for advice, letting her help me wipe my ass.

But then, had I done so, I wouldn’t be here now. I wouldn’t have Dauntless and most of all, you wouldn’t be reading this.

I like being self-reliant.

 

 

 

 

Third Time is the Charm; But it Wasn’t Easy

leaving Cabo the first time on 13 May

After arriving on the southern tip of Baja California May 9th, two weeks later we are faintly getting out of this tourist trap. Oh, Cabo, or better yet, Cabo Falso, has finally loosened her grip on us to to us pass.

My two previous attempts were unpleasant at best, more like miserable. And on each the previous attempts to round the cape in ferocious seas and winds, I had tried two or three times, either tacking away from shore or closer to shore to escape her grip. Each time, I dragged myself back to Cabo, tail between my legs.

On the second attempt, the autopilot also started to not act right, so I felt the failure even more.

My Octopus pump. the top screw was leaking
The screw, replacement “O” ring and broken circ clip for the Octopus pump

With thousands of boats in Cabo San Lucas, I thought it would be easy to find the little “O” ring and broken circ clip my Octopus pump needed. After walking around to numerous places in the hot sun, I found the ring, but not the clip. I called my followers who is a plethora of mechanical advice (he’s the one who told me how to make emergency hydraulic fluid in the middle of the Atlantic), who explained that the circ clip was just a stop, so the screw would not come all the way out.  It was already out, so that solved that problem. I put the new “O” ring on, leak stopped, and pump worked fine.

The Garmin InReach track for the May 13, 20 and 23.
The superfluous tracks are Garmin’s way of introducing us to their world. https://share.delorme.com/dauntless

I am really in debt to Octopus Pumps. This is on the list of winter projects. I really need to have a spare.

We waited and waited. I was very conscious that every day was costing me $100+ The reality is on my budget with all the cruising I do, necessities come first, so a marina becomes a convenience. Thus, it’s the one place I really try to try to control my costs.

That I didn’t like Cabo just added insult to injury.

I make a habit to only look at Windy.com and the forecast winds once or twice a day. With crew on board, I look at it more often to make them happy, but I really don’t. The nature of forecasts is that if they change radically, they are most probably wrong. Thus, once a day will provide enough guidance. Also, while nowadays, the forecast models are run more often, at least every three hours, planet Earth still has a 24-hour day. In simplistic terms, the winds and weather are driven my differential heating caused by our day and night cycle. Therefore, running the model more often does helps, but it won’t totally cure instability issues with the forecast.

I know this is getting too complicated. Let me say this, if you are waiting for a specific weather window, like I was in Cabo, how many times have you noticed that during the day, the forecast is changing, only to return to what it said originally 24 hours later? So, looking at a forecast more than a couple times per day is simply not helpful and more often confusing. This was quite apparent as I watched the winds off the southern Baja Peninsula.

The other phenomena with numerical forecasts are the sliding weather window. I mean it shows favorable whatever in the 24 to 48-hour time frame. But the following day, the favorable whatever is still forecast to come in the 24 to 48-hour time frame. It’s like the forecast is waiting for something to happen. It is in fact; numerical models are just predictors of fluid dynamics. But something in the real world is not acting like the model suggests. Therefore, it keeps sliding the forecast.

Which is fundamentally why numerical models have not replaced weather forecasters. Weather forecasters will know the proclivity of each model for each area and time of season. Changing seasons is the biggest bugaboo for both man and machine. That’s why some months are easier or harder to forecast.

Enough weather for now.

Rounding Cabo Falso

On 23 May 2018, we finally got underway heading to Ensenada with stops along the way. The first protected stop was Maddalena Bay, about 200 miles up the coast.

Our track on Coastal Explorer. We are finally past the point that we turned around last time.

Coming abreast of Cabo Falso, winds had picked up to 310° at 15 gusting to 25 knots. I put one bird in the water to reduce the roll, which had gotten to 10° to 15° to port, as the winds were on the forward starboard quarter. We were pitching 6° to 8° up and down. Not fun, but tolerable for a while.

Six hours after departure, we were finally around the cape and heading NNW. Winds had died down to 10 knots, but we still had an unpleasant pitching motion.

Night view of Coastal Explorer our first night out of Cabo.
You can see the pitching and rolling motions for the last 12 hours on left on bottom of screen.

During the spring and more recently in my time in Cabo, it was apparent that there are three distinct weather regimes off the Baja coast. The southern third has the strongest and most consistent NW winds. The second third has slightly more variety, while the last third, north of Tortuga Bay, must more variable weather, more like southern California.

Our Coastal Explorer chart showing our route for the previous 36 hours, after arrival in Magdalena Bay
Navionics on Tablet, further out view on Coastal Explorer, as we proceed up the channel in Magdalena Bay
Another view out the pilot house window, with Maretron and Coastal Explorer chart

Not until we were close to Magdalena bay did the winds back around to the west, though they were strong at 15 to 20 knots.

We pulled into Magdalena Bay 17:00 on the second day, the 24th, we then spent a few hours going up channel to Puerto San Carlos, to be protected from the coming wind storm.

Another view out the pilot house window, with Maretron and Coastal Explorer chart. It did stay like that the entire time

This leg’s summary: 188 nm, 35 hours, 25 min, avg speed 5.45 knots

Now, let’s check out that dingy. If you missed that fiasco, see:

https://dauntlessatsea.com/2018/07/14/the-dingy-fiasco-part-1/

 

Things I Must Do on Dauntless

Upon waking up this Monday morning, as I was organizing my day, thinking about what I wanted/needed to do, I thought about this blog and what to write. I’d like to finish writing about the events of the trip to Vallejo. But as time passes, so does emotion of the events, making it harder to write about in an interesting way. Thus, the main casualty of losing my laptop for almost two months is insightful writing.

This morning in HCMC, writing this post

On my day’s list of things to do was also to refine my plan for the projects that need to be done on Dauntless. Specially, I want to plan, draw some diagrams, for those projects that I want to get done this September, when I return to Dauntless for 4 weeks.

So, why not write about that. It’s current and may be interesting to some.

I’m sitting in one of my two favorite coffee chops in the Bình Tân district of Hồ Chí Minh City, Vietnam. I come here when I want coffee, or a yogurt blended with orange juice, and that’s what I’m drinking today. The other shop I like, when I want a fruit smoothie, usually avocado.

I’m alone, so it’s a good time to write. My girlfriend Trinh (pronounced like Din), is working. Doing my three-month hiatus bringing Dauntless north, she expanded her sub-contracting job and now has 9 people working for her producing marking and ink pens.

Dauntless under cover in Vallejo

I can’t complain; I do like women who like work. Ultimately, my breakup with Julie was because she picked work over me and D. Why it will be different next time is not in the scope of this post, but one day I’ll write about it. I will say it’s more a cultural thing than a personality thing.  I’ll see Trinh later this morning and afternoon.

During the time on Dauntless, I started to make a list of the things that needed to be done on Dauntless at some point. I hate lists, as they remind me of all the stuff I still must do, but in this case, it’s needed.

Dauntless under cover in Vallejo

My biggest problem when cruising alone (in the sense of not having a long-term partner with me) is that when I arrive wherever, I’m tired. I don’t have the will or desire to sit for the next X number of days and fix, repair, replace, modify what needs to be done.

Of course, I’m fixing things that must be fixed, but no more. I may do some half-assed job just to get going, but I know I must come back and modify it.

One of the big attractions of the marina in Vallejo is that I am in a covered slip. I don’t have to worry about working in the rain or worse, in the sun. I’m looking forward to it.

My current list of projects includes everything that must be done before September 2019, once in Southeast Alaska. Obviously, some things are more critical than others, e.g. I don’t need the diesel heater until Alaska. Other things are conveniences, but on a boat, conveniences are important. So, one of my first projects next month will be to move my fresh water tank selector valve so I don’t have to go under the floor in the guest cabin every xxxing time to change water tanks. Along with that, I will also clean out the water tanks and reseal the inspection ports and install a baffle on the Maretron ultrasonic sending unit. This should be a day’s worth of work. If Trinh was with me, probably half-a-day, since she’s always busy like a bee. I’m more like a sloth, so it will probably actually take two to three days.

Here’s the current Dauntless Project List:

System Item  Problem/Issue/Goal Notes, parts? Est Completion
Engine Change Oil

R&R Impeller Cover

 

Been leaking for 2 years

 

 

Done 6663.88 hrs.

April 2019

H2O Move tank valves

Reseal tank fittings

Replace lines, one-way valves,

Check and redo all clamps

Place caps on Maretron tubes

Make external filter system for tank fill

September
Water Pump pressure switch Adjust ?
Mount Spare pump?
Transmission Real seal leak Check engine alignment?? ?? April 2019
Fuel Sight tubes Put LED strip behind tubes

Bundle wires on port side

Watermaker R&R Seals with kit

Add three-way intake valve

September
Generator Oil & filter

Install Battery

Check remote start switch

Install Perko switch to house?

Check Charger to Gen

 

 

 

Nice not to have to get out jumper cables?

September
Bow Thruster R&R broken gear Would be nice to use again, OTOH I’ve done wo for 3 yrs.
VHF’s ICOM 304 Internal relay?

Handheld

Chinese handheld

Send back to ICOM

Needs battery

Figure it out

September

April 2019

April 2019

Salon Hatches Add hinges to middle two Get someone who knows wood September
Outside Hull R&R rub rail

Touch up paint

Cap Rail refinish

With Stainless steel (CI Hbr) September

April 2019

2019

Ext Doors Touch up, Tung oil 2019
Fly Bridge Water ingress Where? Rail fittings? 2019
Windlass & Anchor Lube windlass

Re-mark Anchor chain

September

2019

Solar Panels Re-wire controllers, fuses, switches

Add array over dingy

Replace terminal blocks and fuse holder September
Purisan Controller corroded Return to Raritan September
Pilot House Electrical Add capacity Run additional cable, pos and neg from ER distribution Sept or April
Paravanes Get two new 28”, Use current as spares

Make holder

Reduce excess lines

April 2019
Boom Winch R&R April 2019
Mast Make New Bracket for Instruments

Get 25’ NMEA 2000 cable

Re-attach spreader lights

September
Diesel Heater Complete Wallas installation 2019
Hookah Face mask and compressor 2019
Hydraulic Fittings

Octopus Pump & Capilano piston

Standardize all fittings

Rebulid

Spare?? 2018 -2019

 

I’m tired just wiring this list. I think I’ll rest now.

 

 

The Good, the Bad & the Ugly

Cabo San Lucas is a sunny, dry, playland for those with more money than sense. It’s a step towards reality, if your starting point was the Mexican Pavilion at Disney World or Las Vegas.

Cabo at night

It’s everything I have a point of avoiding during my last 40 years of international travel and exploration.

Worse of all, it was expensive for Dauntless, almost $100 per day at the IGY Marina. The marina in fact, was on the only bright spot of the whole experience. Accommodating, warm, friendly staff. It was no problem for me to stay on the “T”, as I did not like the idea of trying to maneuver down the various slip xxx.

And then there was Pancho, the 12-year-old sea lion, who lives in the harbor and this marina it seems.

Pancho hitching a ride and waiting for free fish

The other bright spot of time spent in Cabo, was meeting a family, wo was having a birthday party in town at their son’s bar. Larry and I were the only patrons and seeing me eyeing the cake, they must have felt obligated to invite us to share it with them.

An excellent pizza

We inquired about finding really food, not tourist food, and they squeezed us into their little pickup and off we went to the Mexican part of town. Whatever we ate was delicious and I cherish these types of experiences. A wonderful experience in otherwise a boring town.

Our new found freinds

That’s the Good, the Bad and the Ugly are best left unsaid. There is no reflection here, no lessons learned. I knew what it was and it was. 

Pancho on the dock
The statue of Pancho
Little Mexican Place
Dauntless wanting to leave

Moving On.

Four Easy Days

Why can’t they all be like this!

Sunset on the evening of Day 1, 20:02

Xtapa to Puerto Los Cabos and Cabo San Lucas.

After three nice days in Zihuantanejo and Xtapa, Brian, me and the boobies set out for Cabo 4 days away.

The NW winds had died down and we got going under high broken clouds and the temperature in the low 80’s. Winds were light, then as the day progressed, turned southerly (good), but the Pacific coast of Mexico just can’t help itself and my evening the winds were out of the north and northwest again, though not too strong at 8 knots.

Leaving Xtapa for Puerto San Lucas, Day 1, May 6, 07:36

For the next 36 hours the winds were about 5 to 9 knots, at night from the E or SE as a land breeze and during the day from the W or NW as a sea breeze (blowing on to the land to our E).

I was pleased to see the boobies return. They seemed to get the routine down better this time and at times we had as many as a dozen on the rails just enjoying the free ride.

We got buzzed by a fishing trawler, which is becoming the norm since returning to North America.

The fishing trawler that just had to check us out to make sure we were not taking his fish.

The only place it happened in Europe was in the Bay of Biscay. If the French won’t tolerate the Uber disruption, they certainly won’t tolerate anyone taking their fish. That we just look like a trawler, especially with our paravane poles, is an annoying coincidence.

Boobie resting outside pilot house door

In the first 48 hours, we put 333 nm under our belt; more than halfway.

Winds picked on the third day, from the west, and we in the mid-teens overnight, causing the most pitching and rolling since leaving Xtapa. I deployed the windward bird to keep the rolling manageable. Having the windward bird in the water is 80% as effective as both birds and the effect on the drag is the same, thus the bird doing the work also produced the drag.

Just physics, there are no free lunches.

Video of the Second evening

We entered the harbor and large marina of Puerto Los Cabos at 20:25; 85 hours after leaving Xtapa and 570 nm later. Turned out  this was the easiest three days of the entire Baja Bash only I didn’t know it yet!

Puerto Los Cabos was a disappointment. Only a few dollars cheaper than the marina a Cabo San Lucas, it was surrounded by … nothing. A 5-minute taxi ride that cost 30 pesos ($1.50) cost in Huatulco and 50 pesos in Xtapa now cost 200 pesos. I ended up renting a car for $60 for 24 hours. That made it easy to go to airport and drop Brian off and so a little shopping. I ended up staying two nights.

I was spending $90 a day in the marina, Cabo was about the same price. Anchoring was pragmatic at best near Cabo. From reading reviews on Active Captain and Noonsite, the anchorage was open to the swell, but worse, was in the area of all the tourists doing water hijinks. Thus, the locals discouraged boats from anchoring in various ways, which I did not want to test.

Maretron data showing weather data and pitch and roll for the last 24 hours. At this point, the roll tolerable, the pitch is not (multiple scale by about 4, thus -4 is about 16 degrees bow up)

Video of El Cid now passing behind us.

Maretron data showing the roll with bird in the water and increase after I pulled it.
Boobies on the port side rail
El CId passes behind us
AIS on Coastal Explorer showing El CId passing behind us
Encounter with passing cargo ship at 03:00. He looks closer on the chart because of the resolution, but why take chances in the middle of the night, thus the course change.
Morning of Day 2
Morning of Day 2. West of Manzanillo
Dauntless entering the harbor at Puerto San Lucas

 

I was hoping I’d only be in Cabo a day or two at best and a few days at worst.

The hoped-for weather window kept teasing me and then slamming shut in my face. In the last 5 years and 20,000+ miles, I can count on one hand, the number of times I’ve started a passage only to turn around. Cabo made me count on my fingers and toes.

 

,

The Dauntless Fuel System

After three days in Xtapa, I was getting ready to go again.

My Racor systems

The night before departure, I topped up all our fluids, both oil and coolant were down, since we had those repairs the days earlier. While they were topped up upon completion of those repairs, it takes running time for air to work out of the systems.

The rough seas and miserable pitching of the last few days seemed to really scour the fuel tank, so I ran the fuel polisher system (filtering fuel to take water and impurities out) on the starboard tank for 8 hours the day before. During the 8 hours, vacuum on the filter had increased from 4”, which is OK, but not great, to only 5”. Which is marginal. Since we were getting underway for another multiple day passage, I changed the fuel polisher filter, a Racor 900 filter system (Racor 2040 2-micron filters bought on Amazon for $12 each.

I usually don’t run the fuel polisher that often anymore.  Unless needing to really top up the tanks, like leaving the Canaries for the Caribbean, I only put new fuel in one tank. Thus, I can isolate any issues. I then run the fuel polisher on the new fuel to check it out. Usually an hour; If the vacuum doesn’t change significantly, I turn it off. Sometimes the vacuum will even go down, when the new batch of fuel is better than what was in the tank.

Underway, I also always set the return to the same tank it is feeding from. Once, in prehistoric times, I set the return to the other tank as a means to transfer fuel. Of course, I forgot and ran out of fuel while running. I didn’t do that again.

But I did. This second time, I had inadvertently left both feeds and returns open. For whatever reason, my system tends to return more fuel to the port tank and less to the starboard tank if both returns are open. Thus, I emptied one tank. But this time, the engine did notice because I had also left the sight tubes open on top and bottom. The result was that although the starboard tank was empty, enough fuel was being returned, keeping the sight tube full, which was then fed back to the engine.

Aux fuel pump

Had I closed the sight tube, the engine would suck air from the tank feed.

Lesson learned. Nowadays, besides feeding and returning to the same tank, I also keep the top of the sight tubes closed, so that fuel goes back to the tank. Otherwise, it defeats the purpose of using cooler fuel from the tank.

I like the Racor setup very much. Twin primary filters, Racor 500, in parallel, and a Racor 900 for fuel polishing and transfer. For a long-distance cruiser like Dauntless, it’s a mission critical system. Meaning don’t leave home without it. When underway, I don’t go into the engine room often, maybe only twice a day, once in the evening before my shower and bed and in the morning, after my early morning watch. (I usually wait until crew is awake, so I don’t wake them by opening engine room hatch, unless the night before I thought I may have an issue, then I check again as soon as I wake).

Racor filters

The parallel Racors really give me peace of mind. In the early days, when changing filters was more of an adventure than it should be, if I suspected a problem, I’d immediately switch filters to the new one and then monitor the new one for issues (water or clogging). But I didn’t have to deal with the filter just then.  If in a benign environment, I may shut down the engine, but that is rare. Nowadays, I can change a filter in less than two minutes and that includes priming engine if need be. I installed an electric fuel pump just for that purpose. It makes doing any fuel related work so easy. I used to hate changing the engine mounted filters. I still have the scar on the back of my hand from spending days trying to prime engine (turned out to be a failed O ring had clogged fuel line to Injector pump). Nowadays, if I do switch filters while underway, I will change the old filter, so I always have a new one ready to go at an instant.

Fuel from Colon Panama
Strange coincidence that the only place I got significant water in fuel was the only place that gave me a bottle of fuel to prove it was good. Ummm

Nowadays, I almost never have an issue. But when I do, I need the fuel polisher now.

Like when we fueled up in Colon, Panama, waiting to transit the Panama Canal. It was a fuel barge, made even sketchier because they spent some time transferring fuel from a tug to the barge and then to my boat. Once I returned to our slip and ran the fuel polisher, it picked up a lot of water. Another reason to never run from both tanks at once. I knew I had a problem, but it was isolated in the port fuel tank. I also installed those plastic drains that can be opened by hand on all three Racor filters. So, in a situation like this, it made it particularly easy to run fuel polisher a while, when bowl is full of water, empty, run, repeat, until I decide to also change filter. I’ll usually do that at the end.  Then give it a good run again to make sure it’s good to go.

I’ve had a few occasions, in which I just let the fuel polisher run and the vacuum gets to 22” to 24” of mercury (Hg).  When that happens, I am ever more grateful that none of that crap got to engine or even primary filters.

Because the Racors are doing their job so well, I don’t change the engine mounted fuel filters very often. Maybe even on the order of 500 to 1000 hours. This interval has gotten longer and longer because even in the past when I did have some water in the primary filter, the secondary engine mounted filters had none.

I like Fram

You may think that that’s excessive. What’s the harm in changing the primary filters? In my first year or two, the primary filters were the cause of all sorts of issues from blocked fuel lines to air in the system. They are hard to reach, which introduces a greater possibility of error in replacement or even affecting some other nearby engine component.

The Ford Lehman SP135 engine and I have an agreement. I don’t mess with it and it does its’ thing, which is to never stop until so commanded. So, I am particularly careful working near the engine.

A couple of weeks later, this system would again save my bacon. I had carelessly kept running from the starboard tank, even after it went below the sight tube. I did have a reason, I wanted to see if I had really needed the expensive fuel I had added in some expensive place.

I’m in the pilot house and suddenly, I hear the pitch of the engine change. Remember, the Ford Lehman and I have an agreement. The engine pitch never changes. So, in seconds I had the hatch open and was down in front of the engine by the Racors. I instantly switched filters, then took the time to look around. The engine was starting to surge now (up and down in rpms). I looked at the feed tank and saw no fuel in the sight tube. Now the sight tube is still about 20 gallons above the feed line. I open the port tank feed and return and close the starboard feed and return.

Surge continues. I ask Larry to give it some throttle. No change. Throttle back to just above idle. I turn on the electric fuel pump used to prime filters. Add throttle. In about 5 seconds that seems like 5 minutes, the engine smooths out. I wait another minute and turn off electric fuel pump and carefully adjust valves that put electric fuel pump into main fuel line. (otherwise, when first installed, the fuel pump just pump fuel around in a circle, with out the need to go to the engine. Under normal setting this fuel pump is isolated in a parallel loop and the engine uses gravity feed and it’s lift pump).

From first change of engine pitch to running normally again took less than 60 seconds.

My Sp135 was good to go again.

 

 

 

Chasing Weather Forecasts

When will I ever learn? I don’t know what part of me ignores good advice that I give others. It can be about weather, stocks, women or whatever, I’m very consistent, as I seem to consistently do what I tell others is a fool’s errand.

I suppose that makes me the fool.

How it looked on the day of departure for current conditions

Yep, I have certainly earned that this year.

Here are the four snapshots taking from Windy.com of the southern Pacific coast of Mexico taken on 30 April 2018, Monday. These shots highlight what I mean by chasing forecasts. This is different than waiting for the right weather window. That I also had done.

A reminder of some of the vocabulary I use.

Windy.com aka windyty.com is a pretty slick graphical user interface for the numerical weather forecasts that are produced by the National Weather Service, the Europeans, the U.S. Navy, etc. On Windy, at the bottom right of the screen, you can select the two or three models available to view: ECMWF 9km, GFS 22km, and in CONUS, the NAM 5km. The number that follows the model name is the grid resolution, smaller being better. If I was on the east coast USA, I would only look at the Nam. I trust it less on the west coast, since it’s near the edge of the model.

How it looked on the day of departure for the next day, Tuesday

In any case, no matter where I am, I always look at only one model, because I have no way to know which model is working best for that time, space and season.  I use the ECWMF because of the lower grid spacing (excluding the NAM). Next spring, as I prepare to move north again from San Francisco Bay, I will use the NAM and read the NWS forecast discussion for my area of interest. Nothing else. If you look at too much stuff, you will just get confused. (this is well documented, but I won’t go into it now).

How it looked on the day of departure for the next two days, Wednesday

While in Huatulco, I was waiting for the right weather window. I was hoping for 3 to 4 days of light or southerly winds (at any speed).  Looking at the forecasts, it seemed the week of 30 April was it.

I did well wait for the right weather window, what I did poorly was chasing the forecast.

Looking at the map that shows Tuesday 1 May, the Tehauntepec winds were blowing from the Northeast, and while there were northwesterly winds off the coast, there was that lighter blue area well off the coast with winds that seems to be northerly, then turning more northeasterly. That would have been great.

So, I left Huatulco with the idea of heading west longer than needed to try to get west of the stronger NW winds.

That’s Chasing Weather Forecasts. For the first 3 days it seems to work well. We did have light winds and when the winds did pick up from the NW, they were still less than 10 knots.

The problem was as the winds got stronger, we were so far off shore, 70 miles, that we were left with few good options. The 14 hours backtrack to Xtapa was the result.

If one has about capable of 20 knots, then the math changes significantly. Then it’s more viable to chase good weather. But when you boat plods along a fuel sipping 5 to 7 knots, it becomes impossible to get to the right time and place and then stay in that honey spot. Weather moves to quickly.

How it looked on the day of departure for the 3rd day, I’d hoped to be in that area of lighter winds 150 nm due S of Manzanillo. I don’t even know if it ever existed.

In the North Atlantic, Dauntless made about 140 nm per 24-hour day. In that same time, a low-pressure system will move 500 nm and the associated cold front will move even faster. There is no getting out of the way.

In this last passage up the west coast, I didn’t bother with weather forecasts once underway. All I needed to know was that once the stronger NW winds set in, they would get stronger before they got weaker.

Returning to Xtapa was the solution. Chasing areas for better weather, would have been a fool’s errand.